Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Billion
  4. 7100sg
  5. Manual De Usuario

Billion 7100sg Manual De Usuario

Descargar
Página de 61
Chapter 3 Configuration 
13 
 
User Name 
Password 
Administrator Level 
admin password 
User Level 
user password 
2.  Device IP Network settings in LAN site 
IP Address: 192.168.1.254 
Subnet Mask: 255.255.255.0 
 
3.  ISP setting in WAN site 
Virtual Circuit 0: 1483 Routed IP LLC 
 
4. DHCP 
server 
DHCP server is enabled. 
IP address pool from IP Address: 192.168.1.100 to IP Address: 192.168.1.199 
3.2.1 Password 
The default username and password are admin and password respectively. 
 
If you ever forget the password to log in, you may press the RESET button up to 2 
seconds to restore the factory default settings.   
 
3.2.2 LAN and WAN Port Addresses 
The parameters of LAN  and WAN ports are pre-set in the factory.  The default values are shown below. 
LAN Port 
WAN Port 
IP address  
192.168.1.254 
Subnet Mask 
255.255.255.0 
DHCP server function   Enabled 
IP addresses for 
distribution to PCs 
100 IP addresses continuing from 
192.168.1.100 through 192.168.1.199 
(Actually, it can supports up to 253 users.)
Obtain an IP address 
automatically. ISP assigns 
this IP address. 
 
3.3 Information from ISP 
Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of 
service is provided such as PPPoE, PPPoA, RFC1483, IPoA, or PPTP-to-PPPoA Relaying. 
Gather the information as illustrated in the following table and keep it for reference.