Billion 7100s Manual De Usuario

27 

Automatic Reconnect: Check to enable this device to automatically re-establish the PPPoE session 
when disconnected by ISP. 

 

This screen contains settings for LAN interface attached to the LAN port. 

 

IP Address: Default at 192.168.1.254.  

This is the device IP address in LAN site. If you plan to change it to another IP address to a different 
range of IP subnet. Please make sure your PC is also located at the same IP subnet. Otherwise, you may 
not be able to access the router. 

Subnet Mask: Default at 255.255.255.0. 

DHCP Server: Check DHCP Server to enable the router to distribute IP Addresses, subnet mask and 
DNS setting to computers. Hence, the following fields will be activated. If you do not check this selection, 
remember to specify a static IP address, subnet Mask, and DNS setting for each of your local computers. 
Be careful not to assign the same IP address to different computers. 

DHCP address pool selection: Auto or User Defined. If select the AUTO, router will assign an IP 
address back to PC’s IP request. If User Defined, please specify the IP pool range. 

User Defined Start Address: Enter the start address of this local IP network address pool. The pool is a 
piece of continuous IP address segment. The default value is 192.168.1.100. 

User Defined End Address: Enter the last address of this local IP network address pool that you want 
the DHCP server to assign IP addresses to. The default value is 192.168.1.199.