Billion 7100sv Guía Del Usuario
Chapter 3 Configuration
31
3.4.3.3.1 General Configuration
This screen contains some basic settings for the VoIP Module.
SIP: Enable/Disable to use SIP (Session Initiation Protocol) as VoIP call signaling protocol. You need to
enable SIP in order to make or receive SIP calls.
enable SIP in order to make or receive SIP calls.
SIP Registration: Enable/Disable to register a SIP account in the SIP server (refer Service Provider
section below) or not.
section below) or not.
Local SIP Port: Enter the local SIP port, which the device uses to listen incoming requests. (Range from
5000 to 65535, default value is 5060)
5000 to 65535, default value is 5060)
Start Media Port: It is known as RTP (Real-time Transport Protocol) port, provide the base value from
the media (RTP) ports that are assigned for various endpoints and the different call sessions that may
exist within an end-point. (Range from 5000 to 65535, default value is 5000)
the media (RTP) ports that are assigned for various endpoints and the different call sessions that may
exist within an end-point. (Range from 5000 to 65535, default value is 5000)
Interface To Use: Select the PVC line which you uses to connect to the Internet.
Service Provider To Use: Select your service provider or click on “Update Service Provider” to do the
configuration. Details are illustrated below.
configuration. Details are illustrated below.
Login Account To Use: Select login account you want to use or click on “Update User Login Account”
for more configuration. Details are illustrated below.
for more configuration. Details are illustrated below.