Billion 7300vgp Manual De Usuario

Standards-Based Technology 

The BiPAC 7300VGP Wireless Router utilizes the 802.11g standard. 

The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data 

rate up to 54Mbps* within the 2.4GHz band, utilizing OFDM technology. 

This means that in most environments, within the specified range of this device, you will be 

able to transfer large files quickly or even watch a movie in MPEG format over your network 

without noticeable delays. This technology works by transmitting high-speed digital data 

over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. 

OFDM works by splitting the radio signal into multiple smaller sub-signals that are then 

transmitted simultaneously at different frequencies to the receiver. OFDM reduces the 

amount of crosstalk (interference) in signal transmissions. 

The BIPAC 7300G is backwards compatible with 802.11b devices. This means that if you 

have an existing 802.11b network, the devices in that network will be compatible with 

802.11g devices at speeds of up to 11Mbps in the 2.4GHz range. 

 

The BiPAC 7300VGP Wireless Router lets you access your network, using a wireless 

connection, from virtually anywhere within its operating range. Keep in mind, however, that 

the number, thickness and location of walls, ceilings, or other objects that the wireless 

signals must pass 

 

Keep the number of walls and ceilings between the BiPAC 7300VGP and other network 

devices to a minimum - each wall or ceiling can reduce your BiPAC 7300VGP wireless 

product’s range from 3-90 feet (1-30 meters.) 

Position your devices so that the number of walls or ceilings is minimized.Keep the number 

of walls and ceilings between the BiPAC 7300VGP and other network devices to a 

minimum - each wall or ceiling can reduce your BiPAC 7300VGP wireless product’s range 

from 3-90 feet (1-30 meters.)   

Position your devices so that the number of walls or ceilings is minimized.Be aware of the 

direct line between network devices.    Position devices so that the signal will travel straight 

through a wall or ceiling (instead of at an angle) for better reception. Building Materials can 

impede the wireless signal - a solid metal door or aluminum studs may have a negative