Billion 7404v Guía Del Usuario

WLAN Service: Default setting is set to Enable.  If you do not have any wireless, select Disable. 

Mode: The default setting is 802.11b+g+n (Mixed mode). If you do not know or have both 11g and 

11b devices in your network, then keep the default in mixed mode.  From the drop-down manual, 

you can select 802.11g if you have only 11g card.  If you have only 11b card, then select 802.11b. 

And if you have 11n card, you can select 802.11n. 

ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from 

another.  For security purpose, change the default wlan-ap to a unique ID name to the AP already 

built-in to the router’s wireless interface. It is case sensitive and must not excess 32 characters. 

Make sure your wireless clients have exactly the ESSID as the device, in order to get connected to 

your network.  
Note: It is case sensitive and must not excess 32 characters.
ESSID Broadcast:  It is function in which transmits its ESSID to the air so that when wireless 

client searches for a network, router can then be discovered and recognized. Default setting is 

Disable: If you do not want broadcast your ESSID.  Any client uses “any” wireless setting 

cannot discover the Access Point (AP) of your router.

Enable: Any client that using the “any” setting can discover the Access Point (AP).

40