Billion 7404v Guía Del Usuario

WAN - Wide Area Network

WAN refers to your Wide Area Network connection, i.e. your router’s connection to your ISP and

the Internet. Here are the items within the WAN section:

WAN Interface

WAN Profile

and

ADSL

Mode

WAN Interface

WAN Connection-ADSL Mode

The default setting for Connection Mode is ADSL and for Protocol is PPPoE.

Main Port: User can select either ADSL or 3G mode.

Failover / Failback: Set Enable to trigger ADLS / 3G failover / failback function ready.

Backup Port: It links to backup port configuration page. It is necessary to configure it when

Failover/Failback be set.

Connectivity Decision: Set how many times of probing failed to switch backup port.

Failover Probe Cycle: Set the time duration for the Failover Probe Cycle to determine when the

router will switch to the backup connection (backup port) once the main connection (main port)

fails.

Note: The time set is for each probe cycle, but the decision to change to the backup port is

determined by Probe Cycle duration multiplied by connection Decision amount (e.g. From

the image above it will be 12 seconds multiplied by 5 consecutive fails).

Failback Probe Cycle: Set the time duration for the Failback Probe Cycle to determine when the

router will switch back to the main connection (main port) from the backup connection (backup

port) once the main connection is communicating again.

Note: The time set is for each probe cycle, but the decision to change to the backup port is

determined by Probe Cycle duration multiplied by Connection Decision amount (e.g. From

ge above it will be 3 seconds multiplied by 5 consecutive fails).

Detect Rule: