Panasonic kx-ts3282 Guía Del Usuario
Programmable Settings
24
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “
Ringer setting
” by
pressing [ ] or [ ].
3
Press [ ].
4
Scroll to “
Ringer pattern
” by
pressing [ ] or [ ].
5
Press [ ].
• The current settings are displayed.
6
Select the desired ringer tone (1 to 8) by
pressing [ ] or [ ] for each line.
For Intercom you can select the ringer
tone (1 to 8), “
pressing [ ] or [ ] for each line.
For Intercom you can select the ringer
tone (1 to 8), “
Voice
”, “
Auto Ans.
”
(Auto Answer) or “
RoomMntr
” (Room
Monitor).
To move to another line, press [ ] or [ ].
To move to another line, press [ ] or [ ].
• Each time you press [ ] or [ ], the ringer
tone will change and ring. If the ringer
volume has been set to OFF for the line,
the unit will not ring (p. 22).
volume has been set to OFF for the line,
the unit will not ring (p. 22).
7
Press [ENTER] (
Save
key).
• A beep sounds.
• To exit the programming mode, press
• To exit the programming mode, press
[EXIT].
• You can exit the programming mode any time by pressing [EXIT].
–––––––––––––––
Save M1,M2,M3
Save directory
▼
LCD contrast
Ringer setting
Change password
▼
–––––––––––––––
Ringer volume
Ringer pattern
▼
▼
Ringer volume
Ringer pattern
Incoming call
▼
Ringer pattern
L1 L2 Intercom
1 2 3
▼
Ringer pattern
L1 L2 Intercom
1 2 Auto Ans.
▼
▼