Panasonic DBS 576 Manual Técnica

5-30

DBS 576 (USA) issued September 2001

576-50-700

Chapter 5. Key Telephone Features

Section 700 - Operation

•

N/A

•

FF1-0-03: Extension COS (Onhook Transfer at Ringback)

•

FF1-0-03: Extension COS (Onhook Transfer at Talk)

•

FF1-0-03: Extension COS (Onhook Transfer at Camp-on)

•

FF1-0-03: Extension COS (Trunk-to-trunk On-hook Transfer Restriction)

•

If On-Hook Transfer is not enabled for the transferring party’s Extension Class of Service 

(COS), he/she must press the PROG or RELEASE key before hanging up to complete the 

transfer.

•

If the call is not answered by the third party before the Transfer Recall Timer expires, the call 

will recall to the transferring extension.

•

Beginning with Version 3.6, a Transfer Recall (only on non-appearing calls) may be answered on 

another extension using the Call Pickup feature. However, an incoming Transfer Recall cannot 

be picked up during conversation.

•

If a Transfer Recall is not answered before the Recall Duration Timer expires, the call will revert 

to the Attendant group.

•

If the called party does not exist, the call recalls to the transferring extension.

•

You cannot transfer a call to an extension that has Do-Not-Disturb (DND) activated.

•

You can transfer a call to an extension that has Call Forwarding activated. The transferred call 

will follow the call forwarding path of the extension it is transferred to. For example, if extension 

221 is forwarded to extension 225, calls that are transferred to extension 221 will be forwarded to 

extension 225.

•

Calls can be transferred from paging using supervised transfer.

1.   While on a call, press the HOLD key.

Intercom dial tone

2.   Dial the extension number to which the call is to be trans-

ferred.

3.   If your extension does not have Auto Camp-on activated, 

enter the Camp-on (Call Waiting) code (default = 2).

Camp-on tone heard at the called exten-
sion

4.   Complete the transfer: 

•   If On-Hook Transfer is enabled for your Extension COS, 

complete the transfer by replacing the handset or pressing 
the ON/OFF key

•   If On-Hook Transfer is disabled, press the PROG key (or 

RELEASE key is using DSS/72).