Panasonic DBS 576 Manual Técnica
Section 700 - Operation
Chapter 5. Key Telephone Features
576-50-700
DBS 576 (USA) issued September 2001
5-55
Operation
To answer calls using the Headset Operation:
Note: If Headset mode is already on, the following procedure turns it off. If Headset mode is off,
this procedure turns it on.
Hardware Requirements
•
A headset must be installed.
Related Programming
•
FF1-0-3: Extension COS (Dial Tone Stop)
•
FF1-2: Dial Plan
•
FF3: Extension COS
Considerations
•
Intercom Dial Tone is enabled/disabled regardless of Headset mode (per programming for the
Extension Class of Service [COS])
Hot Dial Pad
Description
The dial pad on digital key phones can be designated as “hot” on an extension-by-extension basis.
The Hot Dial Pad allows the user to initiate a call without going offhook. Extensions with the Hot
Dial Pad enabled can initiate calls by pressing any of the numeric keys (0-9)
, and the “*” and “#”
keys
.
The Dial Pad can be hot under these conditions:
•
When the extension is idle
•
When the extension is holding a call
•
When the extension is receiving a page.
The Dial Pad cannot be hot under these conditions:
•
When a call is ringing at the extension (intercom or CO)
•
When the extension is on a call.
Action
Result
1. Pick up the handset or press the ON/OFF key.
Intercom dial tone
2. Press the PROG key.
3. Enter 90 for Headset mode.
4. Replace the handset or press the ON/OFF key.