Panasonic DBS 576 Manual Técnica
Section 700 - Operation
Chapter 6. DSLT Features
576-50-700
DBS 576 (USA) issued September 2001
6-9
Operation
To call an attendant group:
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
•
FF3-0: Extension Number
•
FF5-0: Attendant Hunt Groups
Considerations
•
Up to 20 extensions can be included in an attendant group.
•
The attendant pilot number is flexible.
•
If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialed.
•
Attendant calls are always tone calls (i.e., not voice calls).
Auto Repeat Dial
Description
If you press the REDIAL key while receiving busy tone on an outside call, the System automatically
redials the number. The System continues to redial the number at set intervals until the called number
answers, the caller hangs up, or the maximum of 15 redial attempts is made.
Operation
To use Auto Repeat Dial:
Action
Result
1. Lift the handset or press the ON/OFF
key.
Intercom dial tone
2. Enter the attendant pilot number (default = 0).
Action
Result
1. Press the ON/OFF key.
Intercom dial tone
2. Enter a trunk access code.
3. Dial the phone number.
Busy tone
4. Press the REDIAL key.
System automatically redials number