Panasonic DBS 576 Manual Técnica

Descargar
Página de 376
6-38
DBS 576 (USA) issued September 2001
576-50-700
Chapter 6. DSLT Features
Section 700 - Operation
To transfer a call using OHVA:
Hardware Requirements
N/A
Related Programming
FF1 0 03 (System): Extension COS OHVA Originate
FF1 0 03 (System): Extension COS OHVA Receive
FF3 (Extension): Extension COS Assignments
FF4: FF Key Assignments
Considerations
If Onhook Transfer is enabled, the held call is transferred as soon as the extension sending the 
OHVA hangs up.
If the transferred call is not answered immediately, it will queue for a set time limit, then return 
to the extension sending the OHVA by Transfer Recall Timer.
You cannot receive a Call Waiting message during an OHVA. 
If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement.
Onhook Dialing
Description
Onhook Dialing allows users to dial without lifting the handset. However, the Digital Single Line 
Telephone (DSLT) does not have a microphone so you must lift the handset to talk.
Operation
To use onhook dialing:
Action
Result
1.   While on a call, press the HOLD key.
Current call on hold
2.   Dial the extension number to which the call is being trans-
ferred.
Busy signal
3.   Enter OHVA feature access code (default = 8) and 
announce the call to be transferred.
4.   If transfer is: not accepted, press the FLASH key.
Transfer canceled
5.   Replace the handset.
Action
Result
1.   Press the ON/OFF key.
Intercom dial tone
2.   Enter a trunk access code, or dial an extension number.