Panasonic DBS 576 Manual Técnica
6-42
DBS 576 (USA) issued September 2001
576-50-700
Chapter 6. DSLT Features
Section 700 - Operation
To set up the monitoring extension:
The monitoring operation can be allowed or denied by extension COS and is controlled by the Busy
Override feature. If Busy Override is denied and the user attempts to monitor an extension, the user
will hear a fast busy tone.
Additional operations may be performed from the monitoring extension when it is in monitoring
mode:
Services available on the monitoring extension while the Room Monitoring feature is active:
• Camp On
• Call Back
• Message displayed on LCD when extension is busy
• Message Waiting On/Off
• Cancellation of DND and Call Forwarding by another extension
• Busy Transfer
• DIL Incoming Call (Queuing)
• Call Back
• Message displayed on LCD when extension is busy
• Message Waiting On/Off
• Cancellation of DND and Call Forwarding by another extension
• Busy Transfer
• DIL Incoming Call (Queuing)
Services NOT available to either the monitored or monitoring extension when this feature is active:
• Busy Override
• On-Hook VA
• The ability to receive a text message
• Silent Monitor
• On-Hook VA
• The ability to receive a text message
• Silent Monitor
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Allow/deny Busy Override Send—Monitoring extension)
•
FF1-2-02: Dial Plan at DT Pattern 1
•
FF1-2-03: Dial Plan at DT Pattern 2
Action
Result
1. Dial the monitoring extension access code (default 776)
and the extension number of the monitored extension, OR...
The monitoring extension enters the mon-
itoring mode. (If the monitored extension
has an LCD display, a confirmation mes-
sage will also be shown.)
itoring mode. (If the monitored extension
has an LCD display, a confirmation mes-
sage will also be shown.)
Press an FF key assigned the monitored access code and the
extension number of the monitored extension, OR...
extension number of the monitored extension, OR...
While the handset is on-hook, press an FF key assigned to
the Room Monitor followed by the monitored extension
number.
the Room Monitor followed by the monitored extension
number.
The monitoring extension will automati-
cally enter the monitoring mode.
cally enter the monitoring mode.
Action
Result
1. Placing the handset back On Hook or pressing ON/OFF
Monitoring mode is cancelled. Extension
returns to idle.
returns to idle.
2. Pressing digits 0-9, *, #, HOLD, PROG, CONF, AUTO,
MSG, FF Key
No response is given. Extension remains
in monitoring mode.
in monitoring mode.
3. Flash
Monitoring mode is cancelled. Dial tone
is returned to handset.
is returned to handset.