Panasonic DBS 576 Manual Técnica

Descargar
Página de 376
Section 700 - Operation
Chapter 3. System Features
576-50-700
DBS 576 (USA) issued September 2001
3-21
CO Trunk Interface - DID
The DID feature allows an extension to have a dedicated direct number. The dedicated number allows 
calls to be made directly to the extension, without the caller going through the attendant.
The DID number may have from 1 to 4 digits (typically 4).
Each DID Trunk Interface card (VB-44520) supports up to 8 DID trunks.
Hardware Requirements
The -48V power supply is required.
Related Programming
N/A
Considerations
The DID Trunk card supports 1 to 4-digit dial-pulse (10 pps) or Dual Tone Multifrequency 
(DTMF) signaling. 
DID numbers must be between 0 and 9999.
CO Trunk Interface - Ground Start
Ground start trunks are supported in the System with the VB-44511 Loop Start/Ground Start trunk 
interface. Each card supplies 8 circuits that can be individually configured for either loop start or 
ground start operation.
Ground start trunks are useful in preventing call collision.
Hardware Requirements
When ground start trunks are used, the -48V power supply is required.
Related Programming
N/A
Considerations
N/A
CO Trunk Interface - ISDN BRI
The System supports ISDN BRI with the VB-44530 ISDN BRI interface unit. The VB-44530 is a T-
Point ISDN-BRI that supports 2 B (bearer) channels and 1 D (data) channel (2B + D; 192kbps). This 
unit connects to an ISDN Data Service Unit (DSU). Point-to-point and point-to-multi operations are 
selectable.
The ISDN-BRI supports enblock setting and enblock setting at the sub-address.
Hardware Requirements
N/A
Related Programming
N/A