Panasonic DBS 576 Manual Técnica
3-40
DBS 576 (USA) issued September 2001
576-50-700
Chapter 3. System Features
Section 700 - Operation
This feature does not require the use of a DSS/72 console or entering the programming mode.
Extension Name Assignments
Extension names can be up to 10 characters in length. (Assignment of extension names must be
allowed in the Extension Class of Service [COS].)
Operation
To set extension names using a large-display or small-display phone:
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Press the PROG key.
3. Press the * key.
4. Enter 2 for the Extension Name Assignment mode.
EXT
NO.=>
EXT NAME
displays
5. Enter the extension number.
6. Press the HOLD key.
XXX
A B C D E F XXX
A B C D E F XXX
displays (where
XXX = extension number)
7. Press the FLASH key to clear the existing data.
A B C D E F XXX
displays (where
XXX = extension number)
8. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
3-41.)
3-41.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 3-42.)
9. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-Display Phone” on page 3-41.
• See “Example 2. Small-Display Phone” on page 3-42.
• See “Example 2. Small-Display Phone” on page 3-42.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
• Press the # key to enter a space.
10. Repeat steps 7-8 as many times as necessary to enter the
desired extension name.
Note: Press the FLASH key to clear the entire entry.
11. Press the HOLD key when finished.
Next extension number displays
12. To enter another extension name, press the CONF key and
repeat steps 5-11.
EXT
NO.=>
EXT NAME displays