Panasonic DBS 576 Manual Suplementario

Section 700 - Operation

Chapter 7. SLT Features

576-50-700

DBS 576HD (USA) issued September 2001

6-15

The System allows you to set or cancel both Call Forwarding and Do-Not-Disturb (DND) for your 

own extension in one step.

•

N/A

•

FF1-0-03: Extension COS (Call Forward/All/Busy/No-Answer and DND Cancel)

•

FF1-0-03: Extension COS (Call Forward/All Calls)

•

FF1-0-03: Extension COS (Call Forward/Busy)

•

FF1-0-03: Extension COS (Call Forward/No Answer)

•

FF1-0-03: Extension COS (Call Forward/Other)

•

FF1-2: Dial Plan

•

Calls cannot be forwarded to an extension that already has Call Forwarding DND activated.For 

example, extension 220 can only forward to extension 225 if 225 is not forwarded.

•

If forwarding to an outside number, the destination number must be pre-programmed into a 

System Speed Dial (SSD) code.

•

Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.

•

You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call 

Forwarding - Busy are set. Canceling one mode only affects that mode; however, the other 

modes will remain set until canceled individually.

•

An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A 

manual camp-on to a busy extension will not forward.

•

If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call 

Forward No Answer destination.

•

You can cancel both Call Forwarding and DND by entering 7 * *.

The system provides the following types of Call Hold:

1.   Lift the handset or press the ON/OFF key.

Intercom dial tone

2.   Enter the CF/DND All Clear code (default = 7**).

3.   Replace the handset or press the ON/OFF key.