Panasonic DBS 576 Manual Suplementario

6-26

DBS 576HD (USA) issued September 2001

576-50-700

Chapter 7. SLT Features

Section 700 - Operation

221 is forwarded to extension 225, calls that are transferred to extension 221 will be forwarded to 

extension 225.

•

Calls can be transferred from paging using supervised transfer.

•

If a call is unsupervised transferred to a busy extension, the call will camp on to the busy 

extension.

•

To transfer to a outside party, it is best to use supervised transfer. If the trunk-to-trunk on-hook 

transfer restriction is enabled, a blind transfer will result in the loss of the second call but the 

second call will be kept on hold. If not enabled and the second outside party is busy, the 

transferred party will receive busy.

If you dial a busy extension, you can camp onto that extension and send a Call Waiting signal to the 

called party. The called party then needs only to replace the handset and pick it up again to be 

automatically connected to the new call. The called party can also press the HOLD key to place the 

first call on hold and then answer the waiting call.

The System provides two types of call waiting: 

•

Automatic Call Waiting: You do not need to enter a code to send the Call Waiting signal to 

the busy extension. You need only to remain on the line. 

•

Manual Call Waiting: You must enter a code to send a Call Waiting signal to the busy 

extension.

1.   Lift the handset or press the ON/OFF key.

Intercom dial tone

2.   Dial the extension number.

•   Called party hears alert tone
•   Calling party hears ringback tone

3.   Remain on the line until the called party answers.

1.   Lift the handset or press the ON/OFF key.

Intercom dial tone

2.   Dial the extension number.

Busy tone

3.   Enter the Camp-on (Call Waiting) code (default = 2).

•   Called party hears alert tone
•   Calling party hears ringback tone

4.   Remain on the line until the called party answers.