Panasonic DBS 576 Manual Suplementario
Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
7-33
Hardware Requirements
•
External relays, amplifier, and speakers are required for external paging.
Related Programming
•
FF1-0-02: Paging Override
•
FF1-0-03: Extension COS (Paging)
•
FF1-0-04: Trunk COS (Paging)
•
FF1-2: Dial Plan
•
FF2: Trunk COS
•
FF3: Extension COS
Considerations
•
If an external paging system has been connected, pages can be made to Paging groups 0-9
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.
•
An extension can belong to more than one paging group.
•
Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal unless your system allows Paging Override.
•
Beginning with Version 3.5 and higher, the paging system can be set to “timeout” if a page
remains unanswered for a specified length of time (0 to 255 seconds). If this feature is set and the
timeout period has elapsed, the page originator’s handset will emit a Fast Busy Tone.
Reset Call
Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
Operation
To use Reset Call to dial another extension (after a busy extension):
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
Action
Result
1. Lift the handset.
Intercom dial tone
2. Dial an extension.
Busy tone
3. Enter the last digit of the next extension.