Panasonic DBS 576 Guía Del Usuario
2. Setting Up Your Phone
576-50-750
DBS 576 issued September 2001
29
1. Pick up the handset or press the ON/OFF key.
2. Either:
• Press the PROG key and then press the AUTO key.
OR
• Enter the Speed Dial Set/Clear code (default = 710).
3. Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.
4. Press the AUTO key.
5. Enter the SSD bin number that contains the first part of the number to be dialed.
(If a pause is required, press the REDIAL key.)
6. Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be
linked.
7. Press the HOLD key when you are finished.
8. Replace the handset or press the ON/OFF key.
1. If necessary, select the trunk group (9, 81-84) to access an outside line. (Normally
the trunk is selected by the speed dial numbers.)
2. Press the PSD key.
Assigning and Deleting Names for PSD Numbers
After assigning a PSD number to a one-touch or soft key, you can assign a name to
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name
when you are in the PSD Directory mode.
Note: You need to know the PSD bin number for PSD number in order to assign a
name to it. To determine the bin number, see “Checking Speed Dial Numbers” on
name to it. To determine the bin number, see “Checking Speed Dial Numbers” on
Note: This task requires a display phone.
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
To use a PSD key that links multiple speed dial numbers
To assign a name to a PSD number