Panasonic kx-tg2227 Guía Del Usuario
Make sure the unit is not being used and the handset is lifted off the
base unit.
base unit.
1
Press
(PROGRAM)
.
•The TALK/MUTE indicator flashes.
2
Press
(FLASH/CALL!WAIT/PLAYBACK)
.
•“P” is displayed on the base unit.
3
Press
(0)
.
•“Set time” is announced from the
base unit. If previously adjusted, the
day/time will be heard.
day/time will be heard.
4
Enter the current time (hour and
minute) using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
minute) using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
•The 2 digits of the entered number is
displayed.
5
Press
(*)
to select “AM” or “PM”.
Press
(#)
repeatedly to set the day.
6
Press
(PROGRAM)
.
•The base unit announces the
day/time. The clock starts working.
•If 6 beeps sounds from the base
unit, the setting is not correct. Start
again from the beginning.
again from the beginning.
•You can exit the programming mode any time by pressing (OFF)
.
•In step 4, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter “0100” and select “PM” by pressing (*).)
18
Day and Time
Voice Day/Time Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
announce the day and time that each message was recorded.
If a power failure occurs, the time may be shifted. When “
” flashes
on the base unit display, reprogram the current day/time.
To check the day/time
Press
(PROGRAM)
\
(FLASH/CALL!WAIT/PLAYBACK)
\
(0)
.
•The base unit announces the current day/time. When finished, press (OFF).
(PROGRAM)
(OFF)
(FLASH/CALL!WAIT/PLAYBACK)
TALK/MUTE
Indicator
Indicator
Preparing the Answering System