Panasonic kx-tg2239 Guía De Operación

 
 
 
 
 
 
 
 
Base Unit: 

With the base unit facing you, the antenna is on the right side of the base unit and it should be 

positioned pointing upwards. The handset’s charging cradle is on the left side of the base unit. This is 

1 inch deep depression. For charging, the bottom of the handset is placed in the cradle with the 

handset buttons facing up. The handset also can be placed in the cradle by inverted position. The unit 

beeps when the handset is set properly in the cradle for charging. The rectangular area immediately 

below the logo is the Base Unit Speaker. On the lower right of the Base Unit Speaker is the IN USE 

indicator. To the right of the IN USE indicator is the VOICE MAIL button with VOICE MAIL 

indicator in its middle. Below the IN USE indicator, in the center of the base unit, is the keypad. The 

keypad is laid out in the conventional telephone arrangement with a “nib” on the 5 button. The 

keypad buttons are large, raised ovals. Immediately below the keypad, there are three thin buttons in 

a horizontal row: from left to right, the first button is the HOLD button with the CHARGE indicator 

light to the right. The HOLD button is also the LOCATOR or INTERCOM button. To the right of the 

HOLD button, 2 thin buttons are the VOLUME buttons. The right button is to decrease, the left 

button is to increase the volume during a call. To the right of the keypad are the four buttons in a 

vertical row: the top button is the AUTO button. The AUTO button is also the PROGRAM button. 

Below is the REDIAL button. The REDIAL button is also the PAUSE button. The third is the 

FLASH button. The FLASH button is also the CALL WAIT button. The fourth is the MUTE button. 

The MUTE button is also the RINGER button. Immediately below the MUTE/RINGER button is the 

SPEAKERPHONE button.