Panasonic kx-tg2247 Guía Del Usuario

The answering system is on,
but incoming messages are
not recorded.

You cannot listen to the
recorded messages.

“

” is displayed and the

ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.

You cannot operate the
answering system with the
base unit.

You cannot operate the
answering system from a
touch tone phone.

•The recording time is set to “Greeting

only”. Select “1 minute”, “2 minutes” or 
“3 minutes” (p. 28).

•Memory is full. Erase some, or all, of the

messages (p. 60).

•Make sure that the unit is not being

used.

•Memory is full. Erase some, or all, of the

messages (p. 60).

•The handset user is operating the

answering system, or is engaged in an
outside call. Wait until the IN USE/
CHARGE/HOLD indicator light goes out.

•Make sure you enter the correct remote

code.

•The answering system may not respond

if the tones are too short to activate the
unit. Press each button firmly.

•The answering system is off. Turn it on

(p. 67).

You cannot have a
conversation using the
headset.

•Make sure that an optional headset is

connected properly (p. 72).

•

may have been pressed. 

If “SP-phone” is displayed on the
handset, press 

to continue the

conversation with the headset.