Panasonic KX-TG2314 Guía Del Usuario

Descargar
Página de 64
36
Intercom
Intercom calls can be made between two handsets.
The handsets have the extension number 1 and 2 which has “[1]” and “[2]” on 
the display.
• If the handset is off the base unit or charger when there are missed calls or new 
messages in your voice mailbox, the handset’s extension number “[1]” or “[2]” 
is not displayed. To confirm the extension number, either place the handset on the 
base unit or charger, or view the missed calls (p. 23) and listen to the new 
messages (p. 41).
Paging between Handsets 
Ex. From the Handset 1 to the Handset 2
• If the Auto Talk feature is turned on (p. 14), you can also answer a page by simply 
lifting the handset off the base unit or charger.
• When the ringer volume is turned off (p. 15), the handset will ring at the low level 
for intercom calls.
• You cannot change the ringer tone for intercom calls.
1
Handset 1:
Press [HOLD/INTERCOM].
• The paged handset will ring for 1 minute and the 
Ringer/Message Alert indicator flashes rapidly.
• To stop paging, press [OFF].
2
Handset 2:
Press [C][s] or [HOLD/INTERCOM] to 
answer the page.
• Any button except [d][B] or [OFF] can be 
pressed to answer the page.
3
Handset 1:
When the paged party answers, start talking.
4
Handset 1 or Handset 2:
To disconnect the intercom, press [OFF].
During an intercom call:
• You can switch to the speaker by pressing [s]. To switch back to the receiver, 
press [C].
• If you have difficulty hearing while using the speakerphone on the handset, 
decrease the speaker volume by pressing [d].
• If an incoming call is being received, you will hear two tones (incoming call 
tone, page 44) and the IN USE indicator will flash rapidly on the base unit.
To answer the call, press [OFF], then [C] or [s].
Handset
Calling HS[2]
Call from HS[1]
Intercom
00-00-05
           Mute
L
PQQX13989YA.book  36 ページ  2004年1月22日 木曜日 午後5時4分