Wiebetech cgb Guía Del Usuario
WiebeTech LLC
7.
Secure the two halves together using 2 included screws (2 x 8mm).
8.
Connect the data cable of your choice. The ComboGB can connect via FireWire 400, FireWire 800,
and USB 2.0. Plug one end of the appropriate cable into a port on the host computer, and the other end
to the ComboGB. If the host provides sufficient bus power, the green LED will illuminate and the drive
inside the ComboGB will spin up. Otherwise, you will also need to attach either the USB power cable or
the optional AC adapter.
to the ComboGB. If the host provides sufficient bus power, the green LED will illuminate and the drive
inside the ComboGB will spin up. Otherwise, you will also need to attach either the USB power cable or
the optional AC adapter.
Using the USB power cord
If bus power alone is not able to power the ComboGB, plug the included USB power cord into a USB port
of your computer. Plug the other end into the DC jack of your ComboGB. The power cord supplies DC
5V.
There is a pass-thru USB port on one connector. Some laptops will require the use of both connectors to
supply sufficient power.
Note:
If the ComboGB still cannot operate, your system may not supply enough power. You will need the
optional AC power adapter (DC 5V/2A). This is available from WiebeTech with the product code PWR-2.
C o m b o G B U s e r M a n u a l
- 4 -