Wolf 315w Guia De Especificaciones

Refer to the illustrations and specifications

for overall dimensions, finished rough opening
dimensions and installation specifics.

The Wine Storage unit must be installed to

open a minimum of 90˚ or you will have
problems pulling the shelves out. 

For corner installations, you need allow for a

minimum 3" (76) filler so the door can open to
90˚. If you are using some larger handle
hardware, you will also need to take that into
account.

If you are installing a wine unit next to an

existing Sub-Zero unit, you may have to allow
for a filler strip. Also, if there is 2" (51) or less in
between units, an optional heater kit will need
to be installed to prevent moisture from forming
in between units. The optional heater kit is avail-
able from your Sub-Zero dealer. To obtain local
dealer information, visit the Locator section of
our website, subzero.com.

The anti-tip bracket must be installed to

prevent the unit from tipping forward.

For the overlay design, you will need to

provide a complete door panel frame for the
glass door, where wine will be seen from the
outside. Refer to pages 6–7 for panel informa-
tion.

IMPORTANT NOTE: A solid door panel must not
be installed on a glass door unit, as this may
cause moisture to form behind the panel.

For overlay panel applications, you must

supply your own handle hardware. It is recom-
mended you use our optional handles and use
the pre-drilled holes supplied to locate the
handles within the frame of our unit. Refer to
page 8 for specifics about installing handle
hardware.

Sub-Zero has provided a natural cherry wood

facing to each of the wine shelves. You can
choose to replace these strips with wood more
complementary to your design and surrounding
cabinetry. Refer to the full-scale illustration on
page 10 for dimensions on the wood facing.

A 115 V AC, 60 Hz, 15 amp circuit breaker

and electrical supply are required. A separate
circuit servicing only this appliance is required.

All Sub-Zero Wine Storage units are

equipped with a power supply cord with a
3-prong grounding plug which must be plugged
into a mating 3-prong grounding type wall
receptacle. For Model 315W, locate electrical
anywhere on the back wall.

You must follow all National Electrical Code

regulations. In addition, be aware of local codes
and ordinances when installing your service.

Refer to the Wine Storage Installation Instruc-

tions packed with the appliance, which provides
step-by-step procedures for making sure the
unit is installed properly.