Wyse v90le Guía De Instalación Rápida

Descargar
Página de 15
Wyse Customer Support
                                    
 
 
QSG - WSI 1.3.6 v3.doc 
Pager 8 of 15 
 
TFTPD (Figure 7) 
i.  Setup TFTPD. From “Start”, go to run and browse 
C:\inetpub\ftproot\rapport\tools\sa\util and run the file TFTPD32.exe.  
ii.  Enter the following information in the TFTPD32 settings screen (Figure 7) 
• Security = None 
• Server Configuration 
o
  Timeout = 3 
o
  MAX Retransmit = 40000 
o
  TFTP Port = 69 
• Base Directory  
o
  C:\InetPub\FTProot\Rapport\Tools\sa  
• Advanced TFTP Options 
o
  Option Negotiation = Enabled 
o
  Show Progress bar = Enabled 
o
  Activate Tftpd32 on this interface = Enable 
iii.  
 
Click “OK” and close the window. 
 
Figure 7 - TFTDP Settings 
 
Figure 8 - DHCP Turbo settings 
 
 
DHCP Turbo (Figure 8) 
DHCP Scope need not be set, but here are the recommended parameters: 
 
Scope Information: 
Start Address:   10.1.1.13 
End Address:  10.1.1.20 
Mask:   
 255.255.255.0  
Lease:                6 Hours or less