Panasonic KX-TG2700 Guía Del Usuario

After the voice mail box having received messages, the unit will indicate it
in two ways: (a) “Voice mail” displayed on the handset, and (b) “

”

on the handset and the VM indicator on the base unit will flash. To listen
to your voice mail message(s), follow the steps below.

1

Press the right soft key (

), and press

or .

•The handset is connected to the telephone line

and dials the access number (p. 55).

2

Follow the pre-recorded instructions.

3

When finished, press 

(OFF)

.

•If “Store VM access#” is displayed and 3 beeps sound, store the number (p. 55).

1

Press 

(VM)

.

•The base unit is connected to the telephone line and dials the access

number (p. 55).

2

Follow the pre-recorded instructions.

3

When finished, press 

(DIGITAL!SP-PHONE)

.

•If 3 beeps sound in step 1, you have not stored the voice mail access number. Store

the number (p. 55).

•If “Voice mail” still remains on the handset, “

” on the handset or the VM

indicator on the base unit still flashes even if you have listened to your voice mail
message(s), press (CONF/FUNCTION), and press and hold (HOLD/CLEAR) until
the unit beeps. “Voice mail” will disappear, 

“

”

will stop flashing and the

VM indicator will turn off.

•If your voice mail service uses a voice mail tone and the recorded message is

over 3 minutes long, “Voice mail” may not be displayed, 

“

” and the VM

indicator may not flash.

•If your voice mail service uses a voice mail tone, the tone will be heard from any

parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.

Voice mail

Voice mail