Panasonic kx-tg2730 Guía Del Usuario
To monitor with the handset
1
Press
(HOLD) (INTERCOM)
.
2
Press the right soft key (
).
3
To call the base unit, press
(0).
To call another handset (when the system
has additional handsets, p. 26):
Enter the extension number using the dialing
button (
has additional handsets, p. 26):
Enter the extension number using the dialing
button (
(1)
to
(8)
).
•Your handset will start to monitor the room through the destination unit and
“Room monitor” will be displayed, then the duration time will be displayed.
•To monitor from the speaker, press
. You can place the handset on the charger but
you cannot place it on the base unit to continue monitoring. Placing the handset on the
base unit will disconnect room monitoring. To switch back to the receiver, press
base unit will disconnect room monitoring. To switch back to the receiver, press
.
•The LOCATOR/INTERCOM/TRANSFER indicator flashes and the DIGITAL
SP-PHONE indicator lights on the monitored base unit or “Room monitor”
will be displayed on the monitored handset.
will be displayed on the monitored handset.
4
To end monitoring, press
(OFF)
or place the handset on the base unit.
•The base unit user can stop being monitored by pressing
(LOCATOR/INTERCOM/TRANSFER) or (DIGITAL!SP-PHONE). The monitored
handset user can stop being monitored by pressing (OFF).
handset user can stop being monitored by pressing (OFF).
•If the Room Monitor feature of the destination unit is off or the destination handset
is on the base unit, “Denied” will be displayed and busy tones will sound.
MONITOR
57
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
SP
PRIVACY
[
1
]
Press extension#
to call
to call
MONITOR
Press extension#
for room monitor
for room monitor
Room monitor
01
To monitor with the base unit
1
Press
(LOCATOR/INTERCOM/TRANSFER)
, and press
(MUTE)
.
•The LOCATOR/INTERCOM/TRANSFER indicator light flashes.
2
To call the handset, enter the extension number using the dialing
button (
button (
(1)
to
(8)
).
•The base unit will start to monitor the room through the handset.
•The handset will display “Room monitor”.
3
To end monitoring, press
(LOCATOR/INTERCOM/TRANSFER)
or
(DIGITAL!SP-PHONE)
.
• The LOCATOR/INTERCOM/TRANSFER indicator light goes out.
•The monitored handset user can stop being monitored by pressing (OFF).
•If the Room Monitor feature of the destination handset is off or the handset is on
the base unit, busy tones will sound.