Panasonic KX-TG5210 Guía De Operación
Useful Info
rmation
Answering
System
T
e
lephone System
21
Programmable Settings
For assistance, please call: 1-800-211-PANA(7262)
Preparatio
n
Ringer Tone
You can set the handset ringer to use one of 7 ringer patterns for outside calls.
“Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are preset
melody patterns. The factory preset is “Tone 1”.
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
“Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are preset
melody patterns. The factory preset is “Tone 1”.
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone
1 to 3). If you select a melody pattern, you will not be able to distinguish lines by
their ringers.
1 to 3). If you select a melody pattern, you will not be able to distinguish lines by
their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same
line.
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is “level 3”.
1
Press [MENU].
2
Press the soft key (
) at “Ringer
setting”.
3
Scroll to “Ringer tone” by pressing [d] or
[B], then press the soft key (
).
4
Select the desired ringer tone by pressing
[d] or [B].
[d] or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 20).
the handset will not ring (p. 20).
• You can also select the ringer tone by pressing
[1] to [7].
5
Press the soft key (
), then press [OFF].
1
Press [MENU].
2
Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key (
).
3
Scroll to “LCD contrast” by pressing [d] or
[B], then press the soft key (
).
4
Select the desired contrast by pressing [d] or [B].
• The contrast will change.
• The number of steps indicates the contrast level.
• The number of steps indicates the contrast level.
5
Press the soft key (
), then press [OFF].
Handset
SELECT
Ringer setting
SELECT
Ringer tone
Ringer tone
1:Tone 1
SAVE
Handset
SELECT
Initial setting
SELECT
LCD contrast
LCD contrast
Low High
Ex. Level 3
SAVE