Panasonic kx-tgp551t04 Guía Del Usuario

45

Document Version 2011-03

Note:
L

If the other handset user does not answer the 
call within 1 minute, the call rings at your 
handset again.

Answering a transferred call
Press {C} to answer the page.
Note:
L

After the paging party disconnects, you can talk 
to the outside caller.

Intercom calls can be made between the handset 
and base unit.
Note:
L

If you receive an outside call while talking on the 
intercom, you hear interrupt tones (page 27, 33).
– To answer the call with the handset, press 

{

OFF}, then press {C}.

– To answer the call with the base unit, place 

the corded handset on the cradle, then lift it 
again. If the speakerphone is used, press 
{

SP-PHONE} 2 times.

L

When paging the handset, the paged handset 
beeps for 1 minute.

{

MENU} (center of joystick)

{V}

/{^}: “Intercom” i {SELECT}

{V}

/{^}: Select the desired unit. i {CALL}

L

To stop paging, press {OFF}.

When you finish talking, press {OFF}.

Press {j} – {k} or {ALL}.
L

Lift the corded handset if needed.

L

To stop paging, press the same button.

When you finish talking, press {SP-PHONE} 
or place the corded handset on the cradle.

Press {C} to answer the page.

When you finish talking, press {OFF}.

Lift the corded handset or press {SP-PHONE} 
to answer the page.

When you finish talking, place the corded 
handset on the cradle or press {SP-PHONE}.

Answering an intercom call using auto 
intercom
Before using the auto intercom, turn auto intercom 
on (page 44).

When you are paged by the base unit, speak 
into the microphone.
L

To switch to the receiver, press {C}.

To end the intercom, press {OFF}.

Monitoring audio in a room using auto 
intercom
You can listen to the sound in a room where the 
handset is located using the auto intercom.
Important:
L

Before using this feature, set auto intercom on 
the destination handset to “On (Ringer 
Off)” to allow access by the base unit.

Call the destination handset (page 45).
L

You can listen to the audio.

To mute your sound output, press {MUTE} if 
necessary.

To stop monitoring, press {SP-PHONE} or 
place the corded handset on the cradle.

Y

:

Y

:

Y

: