Panasonic kx-tgp551t04 Guía Del Usuario
Useful Information
52
Document Version 2011-03
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
The handset beeps and/or )
flashes.
flashes.
L
Battery charge is low. Fully charge the batteries. Refer to the
Quick Guide for details.
Quick Guide for details.
I fully charged the batteries, but )
still flashes or 0 is displayed.
still flashes or 0 is displayed.
L
Clean the charge contacts and charge again. Refer to the Quick
Guide for details.
Guide for details.
L
It is time to replace the batteries. Refer to the Quick Guide for
details.
details.
I fully charged the batteries, but
the operating time seems to be
shorter.
the operating time seems to be
shorter.
L
Clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.
dry cloth and charge again.
Problem
Cause/solution
_
is displayed.
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected.
Reconnect the AC adaptor to the base unit.
Reconnect the AC adaptor to the base unit.
L
You are using the base unit or handset in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
L
The handset is not registered to the base unit. Register it (page
40).
40).
Noise is heard, sound cuts in and
out.
out.
L
You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
L
Move closer to the base unit.
The handset does not ring.
L
The ringer volume is turned off. Adjust the ringer volume (page
12).
12).
L
Call forward, Do not disturb, or Block anonymous calls may
have been programmed by your administrator. Contact your
administrator for further information.
have been programmed by your administrator. Contact your
administrator for further information.
The base unit does not ring.
L
The ringer volume is turned off. Adjust the ringer volume (page
16).
16).
L
Call forward, Do not disturb, or Block anonymous calls may
have been programmed by your administrator. Contact your
administrator for further information.
have been programmed by your administrator. Contact your
administrator for further information.
I cannot make a call.
L
Check if the STATUS indicator is lit in green. If it is not lit in
green, see “STATUS indicator”, page 7.
green, see “STATUS indicator”, page 7.
L
You cannot make a call while the base unit is downloading the
software update. Wait until the STATUS indicator stops flashing
and changes to steady green.
software update. Wait until the STATUS indicator stops flashing
and changes to steady green.
L
The handset is too far from the base unit. Move closer and try
again.
again.
L
If the problem is not solved after trying the solutions above,
contact your administrator.
contact your administrator.