Panasonic KX-TS730 Guía De Operación
Preparation
6
For assistance, please visit http://www.panasonic.com/consumersupport
Connections
Note:
L
L
Use only provided Panasonic AC adaptor PQLV10 (9V/850 mA) for proper product
operation. In case of power outage, this product will not work.
L
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
If you subscribe to an DSL service
L
Please attach a noise filter (contact your DSL provider) to the telephone line between
the interface box and the telephone line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 14) do not
the interface box and the telephone line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 14) do not
function properly.
To disconnect the
interface cable, pull
out the cable while
pushing the tabs.
interface cable, pull
out the cable while
pushing the tabs.
AC adaptor
Telephone
line cord
To single-line
telephone jack
(RJ11C)
telephone jack
(RJ11C)
To power outlet (120 V AC, 60 Hz)
Fasten the
AC adaptor
cord.
AC adaptor
cord.
Hooks
Interface cable
1
2
Bottom of the
interface box
interface box
Fasten the
interface cable.
interface cable.
Interface box
Noise filter
(For DSL users)
(For DSL users)
Telephone line cord
To single-line
telephone jack
(RJ11C)
TS730S.book 6 ページ 2005年7月19日 火曜日 午後1時59分