Panasonic kx-ts600 Manual De Usuario

If the Direct Dial button selected is 
occupied, the display on the right will 
be shown.
To overwrite, press [OK] (

Yes key).

To select other empty Direct Dial 
memory, press [

3

] (

No key), press an empty 

Direct Dial button ([M1], [M2] or [M3]).

• A long beep sounds.
• To continue storing other items, repeat from step 2.
• To exit the programming mode, press [EXIT] or wait for 60 seconds.

• To erase other stored items from the Direct Dial memory, see below.
• When using the Call Restriction feature (p. 40), you cannot store a phone number 

in the Direct Dial memory ([M1], [M2] or [M3]).

• You can exit the programming mode any time by pressing [EXIT].
• If a pause is required for dialing, press [PAUSE] where needed. If required, you 

can also store [FLASH] in a phone number. Pressing [PAUSE] or [FLASH] 
counts as one digit (p. 36, 38).

1

Press the required Direct Dial button
([M1], [M2] or [M3]).

2

Press [ERASE].

• To stop erasing, press [

3

] (

No key).

3

Press [OK] (

Yes key).

• A long beep sounds.

• To exit the programming mode, press [EXIT] 

or wait for 60 seconds.

1

Lift the handset or press [SP-PHONE/HEADSET].

2

Press the required Direct Dial button ([M1], [M2] or [M3]).

• The stored number is displayed and dialed.

1

Press the required Direct Dial button ([M1], [M2] or [M3]).

• The stored number is displayed.

2

Lift the handset or press [SP-PHONE/HEADSET].

M1 is occupied

Overwrite ?

 

[

3   

]=No  [OK]=Yes

Erase ?
[

3 

]=No  [OK]=Yes

Erased

Memory Empty

TS600W.book  Page 35  Monday, November 7, 2005  10:47 AM