3com 812 Manual De Usuario
CLI Commands
B-11
delete dns host
<host_name>
Deletes the specified host from the DNS Local Host Table. Use list DNS hosts to
view the DNS Local Host table. After deletion, requests for that host will be
processed through a DNS server, instead of locally. Use list DNS servers to see
which servers are defined.
view the DNS Local Host table. After deletion, requests for that host will be
processed through a DNS server, instead of locally. Use list DNS servers to see
which servers are defined.
delete dns server
<domain_name>
Removes the name server addresses associated with the specified domain from the
Domain Name Server Table.
Domain Name Server Table.
delete filter
<filter_name>
Removes the named filter from the filter table, and deletes the file stored in FLASH
memory. Use list filters to see what filter files are in FLASH memory.
memory. Use list filters to see what filter files are in FLASH memory.
delete file <file_name>
Deletes a file from the FLASH file system. Use list files to see which files are
currently stored.
currently stored.
delete framed route vc
Deletes a framed route from the virtual channel profile.
delete ip network
<network_name>
Deletes an IP network from the interface that you specified when adding the
network. Use list ip networks to see which networks are associated with which
interfaces. Always use disable ip network before deleting it.
network. Use list ip networks to see which networks are associated with which
interfaces. Always use disable ip network before deleting it.
delete ip route
<ip_address>
Deletes an IP address from the IP routing table, that you previously added with add
ip route. Deleting this route will cause IP packets destined for this network to use
the default route, which you can see using list ip routes. See add defaultroute
gateway to find out how to add a default route.
ip route. Deleting this route will cause IP packets destined for this network to use
the default route, which you can see using list ip routes. See add defaultroute
gateway to find out how to add a default route.
delete ipx network
<name>
Deletes an IPX network on the interface you specified with the add ipx network
command. You can list ipx networks to see which are available, and the network’s
status. Be sure to use the disable ipx network command before deleting the
network.
command. You can list ipx networks to see which are available, and the network’s
status. Be sure to use the disable ipx network command before deleting the
network.
delete ipx route
<ipx_net_address>
Deletes an IPX route on the interface you specified with the add ipx route
command. The list ipx routes command displays the current IPX routes.
command. The list ipx routes command displays the current IPX routes.
delete ipx service
<service_name>
type [service_type]
Deletes a static IPX service from the IPX services table. This command will work
only if a complete match on all parameters is found. Refer to add ipx service
command for more information.
only if a complete match on all parameters is found. Refer to add ipx service
command for more information.
delete pat tcp vc
<vc_name>
public_port [number]
delete pat udp vc
<vc_name>
public_port [number]
Parameter
Description
service name
Designation of IPX service.
type
Type of service: file/server, print, etc.