3com 812 Manual De Usuario
CLI Commands
B-21
Type - STATIC or DYNAMIC network
Network Address - address of the network
list processes
Displays all processes running on the system.
Index - a reference number in the process table
Name - designation of the process (e.g.: Domain Name System)
Type - SYSTEM, APPLICATION, FORWARDER or DRIVER
Status - ACTIVE, PENDING or INACTIVE
list ppp
Displays PPP bundles and links. When multiple physical links are combined to run
multilink PPP (RFC1717), the group of physical links is called a bundle. With the
OCR 812, only a single link is supported.
multilink PPP (RFC1717), the group of physical links is called a bundle. With the
OCR 812, only a single link is supported.
This command displays:
Bundle Index - index number of the physical interface in the bundle
Link Index - index number in the list of links
Oper Status - current operational status of the link
Interface Name - designation of interface belonging to this bundle
list services
Displays all network services you defined using the add network service command:
Name - name of service
Server Type - type of service. For example: tftp
Socket - TCP port number used by the service
Close - reveals whether all connections close when you disable this service:
TRUE or FALSE. See add network service command for details.
TRUE or FALSE. See add network service command for details.
Admin Status - the status you have requested for this service: ENABLED or
DISABLED. See the add network service command for details.
DISABLED. See the add network service command for details.
list snmp communities
or list snmp
trap_communities
These commands display the defined SNMP communities, which you previously
defined using the add snmp community command. SNMP trap_communities does
not list access.
defined using the add snmp community command. SNMP trap_communities does
not list access.
Community Name - community designation for the IP address
IP address - IP address of a member of the community
Access (Read/Write) - type of access a member has to MIBs
list syslog
Displays IP addresses which get syslog entries from the system. See add syslog for
more information, and delete syslog command to remove entries. This command
shows:
more information, and delete syslog command to remove entries. This command
shows:
Syslog - IP address to which syslog entries will be sent
Log Level - reporting level of entries to send
Msg Count - current number of messages sent since system bootup
Also see list facilities and set facilities commands, which let you view and change
log reporting levels for each system facility.
log reporting levels for each system facility.