3com 812 Manual De Usuario
CLI Commands
B-31
set ipx system
priority [priority level]
default_gateway [ipx_host_add]
initial_pool_address [ipx_addr]
pool_members [number]
Sets parameters for dynamic IPX networks.
set network service
<admin_name>
server_type [server_type]
socket [socket_number]
data [“string”]
close_active_connections [TRUE | FALSE]
Sets parameters for configured network services.
You can list the configured network services using list network services. The
service must be disabled for this command to work.
service must be disabled for this command to work.
packet_maximum_size
Maximum size packet that this IPX network will support.
rip
Sets the RIP mode.
rip_age_multiplier
Number to multiply the rip_update_interval by, to obtain the value
for the aging out the entries in the RIP database.
for the aging out the entries in the RIP database.
rip_packet_size
Size of RIP packets.
rip_update_interval
How often RIP should send periodic updates.
sap
Sets the SAP mode.
sap_age_multiplier
Number to multiply the sap_update_interval by, to obtain the value
for aging out entries in the SAP database.
for aging out entries in the SAP database.
sap_packet_size
Size of SAP packets.
sap_nearest_replies
Whether or not SAP will look its nearest neighbors.
sap_update_interval
How often RIP should send periodic updates.
Parameter
Description
priority
Priority for the dynamic IPX network.
default_gateway
Default router for the dynamic IPX network.
initial_pool_address
Initial IPX address used to dynamically assign IPX network.
pool_members
Number of addresses to reserve in the pool of IPX addresses used when
dynamically assigning IPX networks.
dynamically assigning IPX networks.
Parameter
Description
<admin_name>
Designation you assigned to network service with the add
network service command. Limit of 32 characters.
network service command. Limit of 32 characters.