3com 812 Manual De Usuario

Displays system wide IP network statistics.

Total Input Datagrams - sum of IP datagrams received

Bad Headers - number of datagrams with bad headers

Bad Addresses - number of datagrams with bad addresses

Forwarded Packets - number of packets forwarded

Bad Protocol - number of packets received with bad protocol

Discarded - number of packets discarded

Successfully Delivered - number of packets successfully received

Total Output Datagrams - sum of datagrams transmitted

Discarded - number of datagrams discarded

Bad Routes - number of datagrams with a bad route

Fragments Needing Reassembly - # of fragmented datagrams

Datagrams Successfully Reassembled - # of broken datagrams 
successfully reassembled

Reassembly Failures - # of broken datagrams unsuccessfully reassembled

Datagrams Successfully Fragmented - datagrams successfully broken 
before transmission

Fragmentation Failures - failed datagram fragmentations before 
transmission

Total Fragments - sum of fragments transmitted

Displays system wide IP information.

IP Dynamic Address Pool Begin - start of IP address range

IP Dynamic Address Pool Size - size of IP address range

IP System Host Address - IP address of the system

IP Forwarding - ENABLE or DISABLE forwarding of IP packets

Displays parameter settings for the specified IP network. See the set ip network 
command on page 29 for additional details.

Interface - interface this IP network runs on

Network Address - network address of this IP network

Frame Type - frame type used by the interface

Status - ENABLED, ACTIVE, INACTIVE, DISABLED

Reconfigure Needed - This is TRUE or FALSE. 

Mask - subnet mask used by this IP network

Station - station address of this IP network