3com 812 Manual De Usuario

CLI Quick Setup Script

4-7

Sample Output Display as Quick Setup Executes

OCR-DSL> set system name "name"

OCR-DSL>set system location "vienna"

OCR-DSL>set system contact "jc"

OCR-DSL>enable command password “password”

OCR-DSL>add snmp community public address 0.0.0.0 access RW

OCR-DSL>enable security_option remote_user administration

OCR-DSL>add user "root" password "!root"

OCR-DSL>add ip network “test” interface eth:1 address 192.168.200.254/C

frame ethernet_ii enable no

OCR-DSL>set dhcp mode server

OCR-DSL>set dhcp server start 192.168.200.1 end 192.168.200.40 router

192.168.200.254 dnsl 192.168.200.254 dns2 0.0.0.0 wins1 0.0.0. wins2 0.0.0.0

mask 255.255.255.0

OCR-DSL>add dns host ocrdsl-3com.com addr 192.168.200.254

OCR-DSL>enable dns

OCR-DSL>add tftp client 0.0.0.0

OCR-DSL>set ip network “test” routing ripv2

OCR-DSL>enable ip network “test”

OCR-DSL>enable ip forwarding

OCR-DSL>add ipx network “ipx” address 12345661 interface eth:1 frame

“ethernet_ii”

OCR-DSL>disable bridge spanning_tree

OCR-DSL>add bridge network “bridge”

OCR-DSL>save all

Saving..... SAVE ALL

SAVE ALL Complete

OCR-DSL>Spawned Process CFP 282002 /./QuickSetup.commands Completed

Successfully

Quick Setup (CLI) is designed only for initial set up of the OCR 812. When setup is
complete, this one-time program will alter your configuration files (which the
program cannot edit). If you make an error and need to restart, use the delete
configuration command to reboot and return to factory default settings.