3com 4200G PWR Guía De Referencia

3Com Switch 4200G Family

 

25

Command Reference

mkdir

Use the 

 command to create a directory in a specified directory of a specified storage device.

mkdir

Use the 

 command to create a directory on the remote SFTP server.

monitor-port

Use the 

 command to configure the destination monitor port.

more

Use the 

command to display the content of a specified file.

move

Use the 

 command to move a file to a specified directory. You can also assign a new name for the file.

name

Use the 

 command to set a name for the assigned VLAN.

name

Use the 

 command to set a name for the assigned VLAN.

nas-ip

Use the 

 command to set the source IP address used by the switch to send RADIUS packets.

ndp enable

Use the

 command in system view to enable NDP globally on the switch. When being executed 

in Ethernet port view, this command enables NDP for an Ethernet port.

ndp timer aging

Use the 

 command to set how long a device will hold the NDP packets received from the 

local device. After the aging timer expires, the device will discard the received NDP neighbor node 
information.

ndp timer hello

Use the 

command to define how often to transmit the NDP packets.

nm-interface vlan-interface

Use the 

 command to configure an NMS interface of the management 

device.

ntdp enable

Use the 

command in system view to enable NTDP globally. When being executed in Ethernet 

port view, this command enables NTDP for an Ethernet port.

ntdp explore

Use the 

 command to start topology information collection manually.

ntdp hop

Use the 

 command to set a range (in terms of hop count) for topology information collection.

ntdp timer

Use the 

 command to configure the interval to collect topology information.

ntdp timer hop-delay

Use the 

 command to set the delay time for a switch to forward topology-collection 

request packets.