3com 4200G PWR Guía De Referencia
3Com Switch 4200G Family
3
Command Reference
acl
Use the
acl
command to reference ACL and implement the ACL control to the TELNET users.
User Interface view
acl
Use the
acl
command to define an ACL identified by a number, and enter the corresponding ACL View.
System view
active region-configuration
Use the
active region-configuration
command to activate the settings of an MST (multiple spanning
tree) region.
MST Region view
add-member
Use the
add-member
command to add a candidate device to a cluster.
Cluster view
address-check
Use the
address-check
command to enable or disable DHCP relay security on a VLAN interface, so as to
start or stop the validity check on user addresses under the VLAN interface.
VLAN Interface view
administrator-address
Use the
administrator-address
command to store the MAC address of the management device on a
member device.
Cluster view
am user-bind
Use the
am user-bind
command to bind the MAC and IP addresses of a legal user to a specified port.
System view
Ethernet Port view
apply qos-profile
Use the
apply qos-profile
command to manually apply the QoS profile to the current port.
Ethernet Port view
apply qos-profile interface
Use the
apply qos-profile interface
command to manually apply a QoS profile to one or more
consecutive ports.
System view
arp check enable
Use the
arp check enable
command to enable the ARP entry checking function, that is, to disable a switch
from creating multicast MAC address ARP entries for MAC addresses learned.
System view
arp static
Use the
arp static
command to configure the static ARP mapping entries in the ARP mapping table.
System view
arp timer aging
Use the
arp timer aging
command to configure the aging time for dynamic ARP mapping entries.
System view
ascii
Use the
ascii
command to configure data transmission mode as ASCII mode.
FTP Client view
attribute
Use the
attribute
command to configure attributes of a user whose service type is lan-access.
Local User view
authentication
Use the
authentication
command to configure an authentication scheme for the current ISP domain.
ISP Domain view
authentication-mode
Use the command
authentication-mode
to specify the authentication mode.
User Interface view
authorization
Use the
authorization none
command to allow users in the current ISP domain to use network services
without being authorized.
ISP Domain view