3com 4500G Guía De Instalación Rápida

C

HAPTER

 3: S

ETTING

 U

P

 

FOR

 M

ANAGEMENT

4 To open a Telnet session using the DOS prompt, enter the IP address of the 

switch that you wish to manage in the following format:

(where xxx.xxx.xxx.xxx is the IP address of the switch)

5 At the login and password prompts, enter admin as your user name and 

press Return at the password prompt (or the password of your choice if you 
have already modified the default passwords).

6 If you have logged on correctly, the switch you want to manage is displayed 

as <4500G>, as shown in Figure 26 on page 44.

In order to set up command line interface management using SSH, refer to 
the “3Com® Switch 4500G Family Configuration Guide”, chapter 64.

This section describes how you can set up web interface management over 
the network.

■

Ensure you have already set up the switch with IP information as 
described in “Methods of Managing a Switch” on page 36.

■

Ensure that the switch is connected to the network using a Category 5 
twisted pair Ethernet cable with RJ-45 connectors.

■

A suitable Web browser.