3com 5500-ei pwr Guía De Instalación Rápida

Replace unit2 with unit3 and so on for each Switch in the fabric.

1 To set the Switch to boot from the new software you have downloaded, 

enter the following:

To set the remaining Switches in the fabric to boot from the new 
software, replace unit1 with unit2 and so on for each Switch in the 
fabric.

2 To set the Switch to load the new bootrom firmware, enter:

To set the remaining Switches in the fabric to load the new bootrom 
firmware, replace unit1 with unit2 and so on for each Switch in the 
fabric.

3 You will now need to reboot the fabric for the changes to take effect. The 

Switch will upgrade the bootrom firmware and boot from the specified 
software .app file. 

The files that you have saved in the backup phase should be deleted once 
the upgrade has completed successfully.

To upgrade software to your Switch via FTP do the following:

1 Enter the following command from User View:

 

(where aaa.aaa.aaa.aaa is the IP address of the FTP server)

If the FTP server has been successfully located, the following information 
is displayed:

Trying...

Press CTRL+K to abort

Connected

DUA1715-0AAA02.book  Page 71  Wednesday, March 23, 2005  11:17 AM