3com 5500-ei pwr Instruccion De Instalación

 

1-26 

Figure 1-4 Network diagram for the FTP test 

 

 

 

z 

Configure FTP Server (Switch B): 

Configure FTP server on Switch B. For specific configuration of FTP server, refer to the 

FTP-SFTP-TFTP part of the manual. 

z 

Configure remote-ping Client (Switch A): 

# Enable the remote-ping client. 

<Sysname> system-view 

[Sysname] remote-ping-agent enable 

# Create a remote-ping test group, setting the administrator name to administrator and test tag to FTP. 

[Sysname] remote-ping administrator ftp 

# Configure the test type as ftp.  

[Sysname-remote-ping-administrator-ftp] test-type ftp 

# Configure the IP address of the FTP server as 10.2.2.2.  

[Sysname-remote-ping-administrator-ftp] destination-ip 10.2.2.2 

# Configure the FTP login username.  

[Sysname-remote-ping-administrator-ftp] username admin 

# Configure the FTP login password.  

[Sysname-remote-ping-administrator-ftp] password admin 

# Configure the type of FTP operation.  

[Sysname-remote-ping-administrator-ftp] ftp-operation put 

# Configure a file name for the FTP operation.  

[Sysname-remote-ping-administrator-ftp] filename cmdtree.txt 

# Configure to make 10 probes per test.  

[Sysname-remote-ping-administrator-ftp] count 10 

# Set the probe timeout time to 30 seconds. 

[Sysname-remote-ping-administrator-ftp] timeout 30 

# Configure the source IP address 

[Sysname-remote-ping-administrator-ftp] source-ip 10.1.1.1 

# Start the test.  

[Sysname-remote-ping-administrator-ftp] test-enable 

# Display test results