3com 5500-ei pwr Instruccion De Instalación
1-5
z
You can configure the password aging time when password aging is not yet enabled, but these
configured parameters will not take effect.
z
After the user changes the password successfully, the switch saves the old password in a readable
file in the flash memory.
z
The switch does not provide the alert function for FTP passwords. And when an FTP user logs in
with a wrong password, the system just informs the user of the password error, and it does not
allow the user to change the password.
Configuring the Limitation of Minimum Password Length
This function is used to enable the switch to check the password length when a password is configured.
If the switch finds the length of the input password does not meet the limitation, it informs the user of
this case and requires the user to input a new password.
Table 1-3 Configure the limitation of the minimum password length
Operation
Command
Description
Enter system view
system-view
—
Enable the limitation of
minimum password length
minimum password length
password-control length enable
Optional
By default, the limitation of
minimum password length is
enabled.
minimum password length is
enabled.
Configure the minimum
password length globally
password length globally
password-control length length
Optional
By default, the minimum
length is 10 characters.
length is 10 characters.
Configure the minimum
password length for a super
password
password length for a super
password
password-control super length
min-length
min-length
Optional
By default, the minimum
length is 10 characters.
length is 10 characters.
Create a local user or enter
local user view
local user view
local-user user-name
—
Configure the minimum
password length for the
local user
password length for the
local user
password-control length length
Optional
By default, the minimum
length is 10 characters.
length is 10 characters.