3com 5500-ei pwr Instruccion De Instalación

 

1-49 

z

 

Switch C and Switch D are the access devices for the service provider network.  

z

 

The 3Com switches 5500-EI operate as the access devices of the customer networks, that is, 
Switch A and Switch B in the network diagram. 

z

 

Switch C and Switch D are connected to each other through the configured trunk ports of the 
switches. The VLAN-VPN tunnel function is enabled in system view, thus implementing 
transparent transmission between the customer networks and the service provider network.  

Network diagram for VLAN-VPN tunnel configuration 

Eth 1/0/1

Switch A

Switch D

Switch C

Switch B

Eth 1/0/1

GE 1/0/2

GE 1/0/1

GE 1/0/2

GE 1/0/1

 

 

1)  Configure Switch A 

# Enable MSTP. 

<Sysname> system-view  

[Sysname] stp enable 

# Add Ethernet 1/0/1 to VLAN 10. 

[Sysname] vlan 10 

[Sysname-Vlan10] port Ethernet 1/0/1 

2)  Configure Switch B 

# Enable MSTP. 

<Sysname> system-view  

[Sysname] stp enable 

# Add Ethernet 1/0/1 to VLAN 10. 

[Sysname] vlan 10 

[Sysname-Vlan10] port Ethernet 1/0/1 

3)  Configure Switch C 

# Enable MSTP. 

<Sysname> system-view  

[Sysname] stp enable 

# Enable the VLAN-VPN tunnel function.