3com 5500-ei pwr Instruccion De Instalación

 

2-8 

Follow these steps to configure console port login with the authentication mode being password: 

Enter system view 

— 

Enter AUX user interface 
view 

user-interface aux 0 

— 

Configure to authenticate 
users using the local 
password 

Required 

By default, users logging in to a switch 
through the console port are not 
authenticated; while those logging in 
through Modems or Telnet are 
authenticated. 

Set the local password 

set authentication 
password { cipher | 
simple } password 

Required 

Set the baud 
rate 

speed speed-value 

Optional 

The default baud rate of an AUX port 
(also the console port) is 19,200 bps. 

Set the check 
mode 

parity { even | none | 
odd } 

Optional 

By default, the check mode of a console 
port is set to none, that is, no check bit.

Set the stop 
bits 

stopbits { 1 | 1.5 | 2 } 

Optional 

The default stop bits of a console port is 
1. 

Configure 
the 
console 
port 

Set the data 
bits 

databits { 7 | 8 } 

Optional 

The default data bits of a console port is 
8. 

Configure the command 
level available to users 
logging in to the user 
interface 

user privilege level level

Optional 

By default, commands of level 3 are 
available to users logging in to the AUX 
user interface. 

Make terminal services 
available to the user 
interface 

Optional 

By default, terminal services are 
available in all user interfaces. 

Set the maximum number 
of lines the screen can 
contain 

screen-length 
screen-length 

Optional 

By default, the screen can contain up to 
24 lines. 

You can use the screen-length 0 
command to disable the function to 
display information in pages. 

Set history command buffer 
size 

history-command 
max-size value 

Optional 

The default history command buffer size 
is 10. That is, a history command buffer 
can store up to 10 commands by default.