3com 5500-ei pwr Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
3-7
Configuration procedure
# Enter system view.
<Sysname> system-view
# Enter VTY 0 user interface view.
[Sysname] user-interface vty 0
# Configure to authenticate users logging in to VTY 0 using the password.
[Sysname-ui-vty0] authentication-mode password
# Set the local password to 123456 (in plain text).
[Sysname-ui-vty0] set authentication password simple 123456
# Specify commands of level 2 are available to users logging in to VTY 0.
[Sysname-ui-vty0] user privilege level 2
# Configure Telnet protocol is supported.
[Sysname-ui-vty0] protocol inbound telnet
# Set the maximum number of lines the screen can contain to 30.
[Sysname-ui-vty0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[Sysname-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[Sysname-ui-vty0] idle-timeout 6
Telnet Configuration with Authentication Mode Being Scheme
Configuration Procedure
Follow these steps to configure Telnet with the authentication mode being scheme:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter the
default ISP
domain view
default ISP
domain view
domain domain-name
Configure the
AAA scheme
to be applied
to the domain
AAA scheme
to be applied
to the domain
scheme { local | none |
radius-scheme
radius-scheme-name
[ local ] | hwtacacs-scheme
hwtacacs-scheme-name
[ local ] }
radius-scheme
radius-scheme-name
[ local ] | hwtacacs-scheme
hwtacacs-scheme-name
[ local ] }
Configure
the
authenticati
on scheme
the
authenticati
on scheme
Quit to
system view
system view
quit
Optional
By default, the local AAA scheme is
applied. If you specify to apply the
local AAA scheme, you need to
perform the configuration
concerning local user as well.
applied. If you specify to apply the
local AAA scheme, you need to
perform the configuration
concerning local user as well.
If you specify to apply an existing
scheme by providing the
radius-scheme-name argument,
you need to perform the following
configuration as well:
scheme by providing the
radius-scheme-name argument,
you need to perform the following
configuration as well:
Perform AAA&RADIUS
configuration on the switch. (Refer
to the AAA part for more.)
configuration on the switch. (Refer
to the AAA part for more.)
Configure the user name and
password accordingly on the AAA
server. (Refer to the user manual of
AAA server.)
password accordingly on the AAA
server. (Refer to the user manual of
AAA server.)