3com 5500-ei pwr Instruccion De Instalación

 

1-3 

Set the user name in 
MAC address mode 
for MAC address 
authentication 

mac-authentication authmode 
usernameasmacaddress [ usernameformat 
{ with-hyphen | without-hyphen } { lowercase | 
uppercase } | fixedpassword password ] 

Optional 

By default, the MAC 
address of a user is 
used as the user 
name.  

Set the user name in 
fixed mode for MAC 
address 
authentication 

Configure the user 
name 

mac-authentication 
authusername username 

Set the user name in 
fixed mode for MAC 
address 
authentication 

Configure the 
password 

mac-authentication 
authpassword password 

Optional 

By default, the user 
name is “mac” and 
no password is 
configured.  

Specify an ISP 
domain for MAC 
address 
authentication 

mac-authentication domain isp-name 

Required 

The default ISP 
domain (default 
domain) is used by 
default. 

Configure the MAC 
address 
authentication timers 

mac-authentication timer { offline-detect 
offline-detect-value | quiet quiet-value | 
server-timeout server-timeout-value } 

Optional 

The default timeout 
values are as 
follows: 

300 seconds for 
offline detect timer; 

60 seconds for quiet 
timer; and 

100 seconds for 
server timeout timer

 

z 

If MAC address authentication is enabled on a port, you cannot configure the maximum number of 

dynamic MAC address entries for that port (through the mac-address max-mac-count command), 

and vice versa. 

z 

If MAC address authentication is enabled on a port, you cannot configure port security (through the 

port-security enable command) on that port, and vice versa. 

z 

You can configure MAC address authentication on a port before enabling it globally. However, the 

configuration will not take effect unless MAC address authentication is enabled globally. 

 

Complete the following tasks to configure MAC address authentication enhanced function: