3com 5500-ei pwr Instruccion De Instalación

Descargar
Página de 1072
 
2-9 
 
 
In the same DHCP global address pool, the network command can be executed repeatedly. In this 
case, the new configuration overwrites the previous one. 
The dhcp server forbidden-ip command can be executed repeatedly. That is, you can configure 
multiple IP addresses that are not dynamically assigned to DHCP clients. 
If an IP address that is not to be automatically assigned has been configured as a statically-bound 
IP address, the DHCP server still assigns this IP address to the client whose MAC address or ID 
has been bound.  
 
Configuring a Domain Name Suffix for the DHCP Client 
You can configure a domain name suffix in each DHCP address pool on the DHCP server. The DHCP 
server will provide the domain name suffix together with an IP address to the DHCP client. 
With this suffix assigned, the client needs only input part of the domain name, and the system will add 
the domain name suffix for name resolution. For details about DNS, refer to DNS Operation in this 
manual. 
Follow these steps to configure a domain name suffix for the DHCP client: 
To do… 
Use the command… 
Remarks 
Enter system view 
system-view 
— 
Enter DHCP address pool view 
dhcp server ip-pool 
pool-name 
— 
Configure a domain name 
suffix for the client 
domain-name domain-name 
Required 
Not configured by default. 
 
Configuring DNS Servers for the DHCP Client 
If a client accesses a host on the Internet through domain name, DNS (domain name system) is needed 
to translate the domain name into the corresponding IP address. To enable DHCP clients to access 
hosts on the Internet through domain names, a DHCP server is required to provide DNS server 
addresses while assigning IP addresses to DHCP clients. Currently, you can configure up to eight DNS 
server addresses for a DHCP address pool. 
Follow these steps to configure DNS servers for the DHCP client: 
To do… 
Use the command… 
Remarks 
Enter system view 
system-view 
— 
Enter DHCP address pool view 
dhcp server ip-pool 
pool-name 
— 
Configure DNS server 
addresses for DHCP clients 
dns-list ip-address&<1-8> 
Required 
By default, no DNS server 
address is configured.