3com 5500-ei pwr Instruccion De Instalación

 

1-10 

The departments of a company connect to each other through Switch 5500-EI: 

z 

Switch A, Switch B, and Switch C are Switch 5500-EI series. 

z 

Department 1 is connected to Ethernet 1/0/1 of Switch A. 

z 

Department 2 is connected to Ethernet 1/0/2 of Switch A. 

z 

Ethernet 1/0/3 of Switch A connects to Ethernet 1/0/1 of Switch B. 

z 

Ethernet 1/0/2 of Switch B connects to Ethernet 1/0/1 of Switch C. 

z 

The data detection device is connected to Ethernet 1/0/2 of Switch C. 

The administrator wants to monitor the packets sent from Department 1 and 2 through the 

data detection device. 

Use the remote port mirroring function to meet the requirement. Perform the following 

configurations: 

z 

Use Switch A as the source switch, Switch B as the intermediate switch, and Switch C 

as the destination switch. 

z 

On Switch A, create a remote source mirroring group, configure VLAN 10 as the 

remote-probe VLAN, ports Ethernet 1/0/1 and Ethernet 1/0/2 as the source ports, and 

port Ethernet 1/0/4 as the reflector port. 

z 

On Switch B, configure VLAN 10 as the remote-probe VLAN. 

z 

Configure Ethernet 1/0/3 of Switch A, Ethernet 1/0/1 and Ethernet 1/0/2 of Switch B, 

and Ethernet 1/0/1 of Switch C as trunk ports, allowing packets of VLAN 10 to pass. 

z 

On Switch C, create a remote destination mirroring group, configure VLAN 10 as the 

remote-probe VLAN, and configure Ethernet 1/0/2 connected with the data detection 

device as the destination port. 

Figure 1-4 Network diagram for remote port mirroring 

 

 

1)  Configure the source switch (Switch A)