3com 5500-ei pwr Instruccion De Instalación

 

2-5 

Because an access port can belong to only one VLAN, its default VLAN is the VLAN it resides in and 

cannot be configured.  

This section describes how to configure a default VLAN for a trunk or hybrid port.  

Follow these steps to configure the default VLAN for a port: 

Enter system view 

— 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Trunk port 

port trunk pvid vlan vlan-id 

Configure 
the default 
VLAN for the 
current port 

Hybrid port 

port hybrid pvid vlan vlan-id 

Optional 

The link type of a port 
is access by default. 

 

The local and remote trunk (or hybrid) ports must use the same default VLAN ID for the traffic of the 

default VLAN to be transmitted properly. 

 

Display the hybrid or trunk ports  display port { hybrid | trunk }

Available in any view. 

 

z 

As shown in 

, Switch A and Switch B connect to PC 1/PC 2 and Server 1/Server 2 used 

by different departments. 

z 

To isolate data between different departments, PC 1 and Server 1 are assigned to VLAN 100 with 

the descriptive string being Dept1; PC 2 and Server 2 are assigned to VLAN 200 with the 

descriptive string being Dept2.